Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Sorry Guest, you are banned from posting and sending personal messages on this forum.

This ban is not set to expire.

[pedropt]

Human people is just like that , we have many curiosity to see inside things  to see how it is .
So , my awus036H original from alfa was broken since i used 3 commands in mdk on a AP in full power .
Now my card can only RX but not TX , and since i will not send it for repair , i decided to post here pictures how it is inside it , to avoid people that have a good card working open it and damage it .
If you have this model then here it is the pictures to your satisfaction :






I hope this fill up your satisfaction and your curiosity .

[StefanoCole]

Thank you for the pictures.

[open]

awus036H original from alfa was broken since i used 3 commands in mdk on a AP in full power .

Sorry, that is NOT possible.
It is NOT possible to damage a wifi interface exposing it to an AP in full power (all APs are by default set to full power), or simply running any of the mdk tests.

I suggest you to check it better, maybe using different PC/antenna/usb cable, it might be working thou.

If you really damaged your wifi interface, you probably did something more serious, such as: patched the drivers with the mod to push transceiver power over limit, fiscally hard hit the device, short-circuit some pin in the USB port, plugged some rusty-faulty antenna, and so on.

[yesimxev]

awus036H original from alfa was broken since i used 3 commands in mdk on a AP in full power .

Sorry, that is NOT possible.
It is NOT possible to damage a wifi interface exposing it to an AP in full power (all APs are by default set to full power), or simply running any of the mdk tests.

I suggest you to check it better, maybe using different PC/antenna/usb cable, it might be working thou.

If you really damaged your wifi interface, you probably did something more serious, such as: patched the drivers with the mod to push transceiver power over limit, fiscally hard hit the device, short-circuit some pin in the USB port, plugged some rusty-faulty antenna, and so on.

Had my one blown lightly after a year 30db usage with aircrack & mdk3 mostly. It has a low power now eg. 5m range. It's the Q1. The top right from the little 3 chips. Kind of melt. If anyone would know what to replace with, please let me know. BTW I know I have used too long with 30db and messed up that chip. Nothing to do with aircrack it's just heat..

[yesimxev]

awus036H original from alfa was broken since i used 3 commands in mdk on a AP in full power .

Sorry, that is NOT possible.
It is NOT possible to damage a wifi interface exposing it to an AP in full power (all APs are by default set to full power), or simply running any of the mdk tests.

I suggest you to check it better, maybe using different PC/antenna/usb cable, it might be working thou.

If you really damaged your wifi interface, you probably did something more serious, such as: patched the drivers with the mod to push transceiver power over limit, fiscally hard hit the device, short-circuit some pin in the USB port, plugged some rusty-faulty antenna, and so on.

Had my one blown lightly after a year 30db usage with aircrack & mdk3 mostly. It has a low power now eg. 5m range. It's the Q1. The top right from the little 3 chips. Kind of melt. If anyone would know what to replace with, please let me know. BTW I know I have used too long with 30db and messed up that chip. Nothing to do with aircrack it's just heat.. i will attach pic too